Jewelry tumbling machine rotary tumbler Jewlry Tool

Jewelry rotary tumbler Cleaning Machine .jewelry tool polishing machine 1.High quality cheap price 2.warranty:1 year Jewelry rotary tumblerCleaning Machine .jewelry toolpolishing machine1.High quality cheap price2.warranty:1 year   

Dimension:280*220*290mm,Weight:6kg,Capacity:5kg,Voltage:220V-110V,Bucket Dimension:190*180mm.

 

Safety Instructions

Before using your machie, please read all safety instructions. They are for your protection and should always be allowed to reduce the risk of personal injury or damage to the tool.

Never operate any accessory at speeds above it's maximum speed rating. Never operate your machine during a perceptible power decrease. Turn the machine off and do not use unitl power is fully restored.

How To Load Rotary Barrels For Metal WorkpiecesEffective and professional results from your tumbling processes depends on knowing how to properly load your barrel for the best result. Follow these steps to achieve the best finish and most cost-effective process for your jewelry pieces using your rotary tumbler.

Code	Voltage		Capacity	Timer tumbling		Bow Dia (mm)	variable speed
BK-0028	220V/110V		3KG	0-60 minutes		145*150	yes
BK-0057	220V/110V		5KG	0-60 minutes		190*180	yes
BK-0025	220V/110V		8KG	0-60 minutes		220*210	yes
BK-0026	220V/110V		11KG	0-60 minutes		310*240	yes
BK-0026B	220V/110V		11KG	0-60 minutes		310*240	yes
BK-0027	220V/110V		12KG	0-60 minutes		300*240	yes
BK-0071	220V/110V		20KG	Fixed Time Tumbling		250*315	yes
BK-0094	220V/110V		25KG	Fixed Time Tumbling		250*390	yes

Set-UpThese tumblers come fully assembled. Simply place the tumbler base on a sturdy, level work surface.

Step 1Set the barrel on end and remove the lid.                                                                                                                  Step 2Add steel media to the barrel depend one  the max  capacity

Step 3Add your workpieces; using 1 part workpieces to 4 parts media, by volume.  

Step 4Add your compound solution to the barrel, filling the barrel to about 1/2" above the level of the media. (Follow instructions on the label of the compound you're using to mixing the solution properly.)  

 Step 5Secure the lid onto the barrel.Position barrel between roller guides.  

Step 6Position barrel between roller guides and start tumbling.

Step 7                                                                                                                                                                      Tumble for no more than 120 minutes.   

Step 8

Rinse the workpieces, stainless steel shot and the tumbler barrel. Dry the workpieces.          

WARNING!!!

Rotating rollers can be dangerous. Turn the rollers off when loading the barrel. Tie hair securely behind the head and wear snug-fitting garments. Keep hair and loose clothing away from the machine at all times.

Polishing Medias (need to order separately)

		Model	Name			size
		BK-1019A	Round Application:Application:Rotary Tumbler &Vibratory Tumbler,			Size:Φ1.5mm
		BK-1019B				Size:Φ2.0mm
		BK-1019C				Size:Φ3.0mm
		BK-1019D				Size:Φ4.0mm
		BK-1019E				Size:Φ5.0mm
		BK-1019F				Size:Φ6.0mm
		BK-1018	Oval Beads,Iron material,Application:Application:Rotary Tumbler &Vibratory Tumbler			Size:Φ3.0mm
		BK-1020	Double-Ended Nails, Iron materialSize:Φ2X7.5mm. Scope of Application:Application:Rotary Tumbler &Vibratory Tumbler			Size:Φ2X7.5mm.
		BK-1021	Diagonal Cylinder, Iron materialSize:Φ2X4.5mm. Scope of Application:Rotary Tumbler &Vibratory Tumbler			Size:Φ2X4.5mm
		BK-1022	Ball Cones, Iron materialSize:1/8",3/20",3/8". Scope of Application:Rotary Tumbler &Vibratory Tumbler			Size:1/8"
						Size:3/20"
						Size:3/8"

Cleaning the Stainless Steel Shot

Stainless steel shot should be kept as clean as possible  at all times. We recommend that shot be cleaned after every second or third use.1.  steel shot cleaner according  to the directions on the bottle.2.  Add the steel shot into the tumbler.3.  Add enough diluted shot cleaner to cover about 1” over the steel shot.4.  If the water appears dirty after tumbling, rinse the  shot and repeat the process (the shot is clean when the liquid cleaner is the same color it was before it  was put in the tumbler).

Care and Maintenance of Tumbler

1.  Before operating the tumbler, be sure that the bearings are cradled in the end plates of the tumbler.2.  Be sure both shafts turn freely; a binding shaft may throw the barrel off its rollers.3.  Oil the bearings at the beginning of the operation and once a month after the initial oiling; use oil sparingly.4.  Do not spill abrasives on bearings or motor.5.  Use care; this motor will become hot to the touch when running. This is normal but requires caution around the motor.6.  Tumblers are protected by a thermal overload device; if the motor overheats, the unit automatically shuts off.  If this happens, check for bound bearings or excessive weight; wait for the motor to cool, and it will restart by itself.7.  To assure long belt life, make certain that motor and drive pulleys are in line. Necessary adjustments can be made by adjusting the set-screw on the motor pulley.8.  If the barrel or the roller guides become wet, dry them thoroughly to prevent barrel slippage.

Repair Service

Factory repairs are done promptly and reasonable cost. If you wish, you can send your equipment directly to the factory service Dept. Be sure to give your street address and telephone number. The equipment should be accompanied by a brief note describing the problem. Estimates will be made u pon request.

LIMITED WARRANTY

BOKING INDUSTRY CO., LTD warrats the magnetic tumbler to the free of defects in material or workmanship for a period of 1 year after purchase. During the warranty period, the defective product will be repaired without charge or, at our option, the purchase price will be refund. This warranty does not over damage caused in the transit or by accident , misuse, or ordinary wear.

ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO WARRANTIES OF FITNESS AND MERCHANTABILITY, ARE HEREBY LIMITED IN DURATION TO A PERIOD ENDING ONE YEAR FROM DATE OF PURCHASE, AND WE WILL NOT BE LIABLE OR RESPONSIBLE FOR ANY SPECIAL OR CONSEQUENTIAL DAMAGES.

Repair or replacement will be made at our option if the product is returned post-paid to:

BOKING INDUSTRY CO., LTD 

Building A, Fengyayuan,  Liutang, Xixiang, Baoan,  Shenzhen, CN, 518101 .

All warraty repair must be done at the factory at the above address. We will not pay any shipping or transportation charges. This warranty only covers the original purchaser of the product. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you.

Afterservice: All machines will enjoy one year warranty

Any question about our products, we will be happy to answer you within 24 hours

Sincerely look forward to any of your Inquiry

Boking Industry Co.,Ltd is a professional manufacturer of jewelry making tools & equipment, electronic balance, diamond testers, jewel consumables, polishing machine, bristle brushes, polishing buff etc. 

Jewelry tumbling machine rotary tumbler Jewlry Tool